PerkinElmer Informatics Support Forum
Decrease font size
Increase font size
Topic Title: The 'LASER ON' LED on the front of the ProSync is off and the lasers do not work.
Topic Summary:
Created On: 11/11/2015 3:31 PM
Status Post and Reply
Linear : Threading : Single : Branch
Topic Tools Topic Tools
View topic in raw text format. Print this topic.
 11/11/2015 3:31 PM
User is offline View Users Profile Print this message


Jace

Posts: 23
Joined: 5/9/2014

This means that the ProSync is either turned off or the safety interlock is not closed.

1. Check the Power LED on the front of the ProSync. If this is off make sure the unit is connected to the mains and the power switch on the rear of the unit is on.

2. Turn the LASER key switch on the front of the ProSync to the ON position.

3. If the LASER ON LED is still off check the magnetic switch (may be fitted to a door) that is connected to the INTERLOCK SAFETY SWITCH on the rear of the ProSync and make sure this circuit is closed.

FuseTalk Basic Edition v4.0 - © 1999-2018 FuseTalk Inc. All rights reserved.